frangsc 0 Share Posted August 29, 2020 El 8/7/2020 a las 19:44, Pandemic dijo: ¡Hola a todos! Hoy es un gran día para nosotros, ya que finalmente permitimos que todos vean en qué hemos estado trabajando y mejorando gracias a las betas cerradas y para el personal: DreamBot 3 (DB3). Descarga DB3 Launcher Intentaré ser breve, ya que estoy seguro de que algunos de ustedes están interesados en usar el nuevo cliente beta. Descargo de responsabilidad: esta es la versión Beta de DB3 y, por lo tanto, todavía está en desarrollo activo y está sujeta a cambios. caracteristicas: Soporte redimensionable Soporte para cualquier nivel de zoom GUI completamente reelaborada Compatible con versiones anteriores de los scripts de DreamBot 2 (sin embargo, aún es necesario reconstruirlos con el nuevo jar del cliente) La gran mayoría de los scripts de SDN están disponibles actualmente y deberían estar funcionando en DB3 Web Walker mejorado para incluir muchos nuevos nodos y tipos de nodos (algunos todavía están deshabilitados durante la versión beta) Sistema de descanso simplificado Mayor seguridad y un servidor de inicio de sesión rediseñado Gran cantidad de mejoras de rendimiento y estabilidad Mucho más de lo que seguro estoy olvidando Notas importantes: Deberá volver a iniciar sesión una vez que inicie DB3 por primera vez, y todas las configuraciones de su cliente y las cuentas guardadas no se transferirán, por lo que deberá actualizarlas manualmente. Esto incluye habilitar el modo encubierto. Si bien la mayoría de los scripts de SDN deben ejecutarse y funcionar en DB3, tenga en cuenta que puede recibir una advertencia sobre el rendimiento de la GUI y puede hacer que el cliente deje de responder o se retrase. Esto debería ser temporal y solucionará una vez que el scripter haya optimizado su script para DB3. Si tiene algún problema con el cliente, cree un hilo y asegúrese de mencionar que está ejecutando DB3 beta, e incluir el número de compilación (se puede encontrar en la barra de título). Si es un scripter, puede probar sus scripts locales actualizando la referencia de su biblioteca al cliente DB3 (DreamBot / BotData / client-3.0.0.jar) en el lugar del cliente DB2, limpie el proyecto y luego haga una reconstrucción completa. del JAR. Benchmarks de desempeño: Registro de cambios beta: Revelar contenidos ocultos Compilación 16: Varias correcciones y mejoras Más refactorización y estatización interna Compilación 15: Script que detiene los cambios Corrección de configuración Refactorización interna y mayor limpieza y estática Varias otras correcciones y mejoras Compilación 14: Mejoras de rendimiento Cambios internos del mouse Instancia # dispatchCanvasEvent agregada Limpieza y mejoras de QuickStart Construir 13: Entidad # isOnScreen mejorada para ser más precisa y evitar quedarse atascado mientras interactúa Correcciones y mejoras de Game Explorer Correcciones y mejoras de la consola de depuración Varias correcciones de NPE Problema de inicio rápido solucionado Construir 12: Los métodos de la cámara ahora son más precisos Búsqueda de caminos local arreglada al subir Args de inicio rápido corregidos para configurar el proxy y la cuenta con contraseña Etiquetas de configuración renombradas Bank#depositAllExcept fixed Various bug fixes Build 11: Mouse improved in lower FPS settings WorldHopper fixed in lower FPS settings Dialogue#inDialogue fixed for resizable Added Magic#interact Build 10: Significant interaction improvements when moving and/or interacting with a moving entity Scripts should no longer randomly stop after starting Various other fixes Build 9: Diagonal doors fixed Web walking performance improvements Web walking fixes Camera over-rotation fixed Various NPE fixed Build 8: Web walker improved, Lumb. castle fixed LoginUtility#changeWorld fixed Settings panel enlarged Build 7: Improved accuracy of FPS target in fixed mode (may need to adjust lower to maintain same CPU usage) Map#canReach fixed Walking#canWalk added Build 6: Login will now return correctly if an account is locked Last used account will be cleared if you unselect an account Projectiles fixed Performance improvements Build 5: Massive client memory and CPU optimizations throughout Walking fix New launcher with improved proxy saving between client Control bar compressed a little bit World hopper improvements Map#canReach fixed Fixed mode interactions improved Build 4: Significant performance improvements across all of the client Game debugger duplicated items fixed Mouse NPE fix Now should save last used account and script category selections Web walking fix to avoid using unnecessary nodes Inventory tool fix for resizable World hopper / inDialogue fix for resizable Build 3: Models significantly improved, proper NPC scaling, no more missing edges Entity interactions improved Added VIP popup whenever you run out of tabs Various other fixes Build 2: Tabs reworked La velocidad del mouse ahora exponencial más allá del 50%, también ahora cambia otros parámetros del algoritmo del mouse para que sea más rápido en el extremo superior Las interacciones del mouse se arreglan a velocidades muy bajas donde salta después de unos segundos Corrección de interacción de entidad en recuperación de fallas GameObjects # más cercano fijo El marco de inicio de sesión cambió ligeramente, se agregó una advertencia acerca de intentar usar el correo electrónico en lugar del nombre para mostrar --- Espero que lo disfruten y háganos saber cualquier problema que tenga. ¡Muchas gracias! El equipo de ensueño hi i am interested in using the bot but i have a problem my pc when I open it tells me the change log ins´t available at this time, check your firewall sttings or try again later! Link to comment Share on other sites More sharing options...
powerrangerx 0 Share Posted August 29, 2020 Is there going to be an extra push for scripts to support QuickStart, or is that primarily if I want to write my own scripts? There's not a good indication right now which ones in the repository support it Link to comment Share on other sites More sharing options...
LordJashin32 54 Share Posted August 30, 2020 19 hours ago, powerrangerx said: Is there going to be an extra push for scripts to support QuickStart, or is that primarily if I want to write my own scripts? There's not a good indication right now which ones in the repository support it I think it should be mandatory for some of the higher scripter ranks. That way at least the heavily bought paid scripts will have them. I'm a big bash fan myself. And bash is scripting. so it should be part of the scripting ranks i think. But its whatever. just like the gui is optional so is the bash. i get it. But bash is my most favorite scripting tool. Link to comment Share on other sites More sharing options...
l0l1yp0p 2 Share Posted August 30, 2020 Unsure if this has been fixed, but this is still very laggy on MacOS - essentially unusable latest Java, MacOS 10.15.4, DB3 Build 16 Have tried disabling rendering and limiting CPU, nothing obvious in the logs Link to comment Share on other sites More sharing options...
1TickPony 0 Share Posted August 30, 2020 Guys, neither DB3 or the traditional client are loading up for me... it's stuck on "please wait... client is downloading" and i've been using the traditional client fine for the last weeks... any help appreciated! Link to comment Share on other sites More sharing options...
holic 233 Share Posted September 4, 2020 Hey I found a wee bug with build 16 (might be only in dev mode?): When a script is running, if you click stop and then click run before the previous script finishes up the stop button is hidden but the script is left running. You aren't able to stop it by running a new script or clicking the reload previous script button so you've just got to close out the client. Not a huge thing but maybe the solution (besides me being more patient) is to only hide the stop button after it's confirmed that the script finished. Link to comment Share on other sites More sharing options...
Pandemic 2714 Author Share Posted September 4, 2020 Build 17 released 2 hours ago, holic said: Hey I found a wee bug with build 16 (might be only in dev mode?): When a script is running, if you click stop and then click run before the previous script finishes up the stop button is hidden but the script is left running. You aren't able to stop it by running a new script or clicking the reload previous script button so you've just got to close out the client. Not a huge thing but maybe the solution (besides me being more patient) is to only hide the stop button after it's confirmed that the script finished. Should be fixed in 17 Link to comment Share on other sites More sharing options...
Mancubus 8 Share Posted September 5, 2020 Is there any way to setup different breaks for each account like in Dreambot 2? I loved that feature. Link to comment Share on other sites More sharing options...
Pandemic 2714 Author Share Posted September 5, 2020 47 minutes ago, Mancubus said: Is there any way to setup different breaks for each account like in Dreambot 2? I loved that feature. Unfortunately not, adding breaks per account just didn't make much sense in the grand scheme of things. You can still toggle breaks per open client, however. Link to comment Share on other sites More sharing options...
Mancubus 8 Share Posted September 5, 2020 7 minutes ago, Pandemic said: Unfortunately not, adding breaks per account just didn't make much sense in the grand scheme of things. You can still toggle breaks per open client, however. That's quite unfortunate indeed 😞 That way I could quickstart bots with their own breaks which was pretty nice. Since it is in beta still, would you consider adding it back? IMO Dreambot2 had the best break system already of all public clients because of that feature. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.