Naughty Vic 6 Share Posted March 18, 2017 (edited) I'd like to thank Hashtag for giving me the opportunity to try the script for the day. The script is well done but at first it took a little bit to figure out how it worked, I'll elaborate more later. I setup four woodcutters early in the day when I received the trial and left them overnight. I was surprised to wake up to all four of them still running. I only ended up losing one of them later that day. Just in that one day I was able to get 60 woodcut on all the them, 57 on the one that was disabled. Now please factor in that I was in a bad area with other fellow bots, if I were to member them or have had a more private location it bet it would be a different story. The script is just great and it's really hard to think of anything to improve upon. The paint location was covering up a few bank spaces a little but that wasn't really a problem. With the new drop update maybe there could be a setting to click drop the logs if one were to power cut, then again I only power cut to level 15 so not really necessary. The anti ban and world hopping is a pleasure to have and the fact you can setup your own location is unreal. You can set it to a remote location, maybe loss a couple logs per hour, so there is less people to report to report and increase bot life. Like I was saying before the script is complex, which is a good thing, and had me baffled for a few minutes trying to figure it out but it didn't take long, maybe 5-10minutes. I think a little tutorial would be nice encase someone as a little more difficultly then I did. Basically go to the the location you wish to cut, place your character in the center of the location, so the trees are all around you. Once you're setup, go to the third tab and click get location, adjust the square size of your choosing. Then refresh the settings in the same tab and pick the type of tree. Name it and save it then go to the second tab and refresh, you should see some default locations already and the one you saved, select it. Now go to the first tab, highlight bank/drop or world hop. Just click start and you will be on your way. I wasn't looking at the GUI when I wrote this but it should give a general idea. I'm most likely going to get this script, I was thinking of trying other ones but this one hit it out of the park. I'll post this review in the other section as well. Thanks again Hashtag! Edited March 18, 2017 by Naughty Vic Hashtag 1 Link to comment Share on other sites More sharing options...
big zoowapp 0 Share Posted March 19, 2017 how can you delete presets??? it wont let me set anymore an ive only made 2 I don't get it, please help!! Link to comment Share on other sites More sharing options...
NZL 13 Share Posted March 19, 2017 I upvoted, can I have a trial? Link to comment Share on other sites More sharing options...
Hashtag 8702 Author Share Posted March 19, 2017 I upvoted, can I have a trial? Enjoy! I'd like to thank Hashtag for giving me the opportunity to try the script for the day. The script is well done but at first it took a little bit to figure out how it worked, I'll elaborate more later. I setup four woodcutters early in the day when I received the trial and left them overnight. I was surprised to wake up to all four of them still running. I only ended up losing one of them later that day. Just in that one day I was able to get 60 woodcut on all the them, 57 on the one that was disabled. Now please factor in that I was in a bad area with other fellow bots, if I were to member them or have had a more private location it bet it would be a different story. The script is just great and it's really hard to think of anything to improve upon. The paint location was covering up a few bank spaces a little but that wasn't really a problem. With the new drop update maybe there could be a setting to click drop the logs if one were to power cut, then again I only power cut to level 15 so not really necessary. The anti ban and world hopping is a pleasure to have and the fact you can setup your own location is unreal. You can set it to a remote location, maybe loss a couple logs per hour, so there is less people to report to report and increase bot life. Like I was saying before the script is complex, which is a good thing, and had me baffled for a few minutes trying to figure it out but it didn't take long, maybe 5-10minutes. I think a little tutorial would be nice encase someone as a little more difficultly then I did. Basically go to the the location you wish to cut, place your character in the center of the location, so the trees are all around you. Once you're setup, go to the third tab and click get location, adjust the square size of your choosing. Then refresh the settings in the same tab and pick the type of tree. Name it and save it then go to the second tab and refresh, you should see some default locations already and the one you saved, select it. Now go to the first tab, highlight bank/drop or world hop. Just click start and you will be on your way. I wasn't looking at the GUI when I wrote this but it should give a general idea. I'm most likely going to get this script, I was thinking of trying other ones but this one hit it out of the park. I'll post this review in the other section as well. Thanks again Hashtag! Thank you for the amazing feedback and guide! I appreciate it. As you said, it might be tricky to use at first. I have planned on redoing the gui just to make it easier to use and also implement new features =) how can you delete presets??? it wont let me set anymore an ive only made 2 I don't get it, please help!! Go to C:\Users\You\DreamBot\Scripts\#1Woodcutting\ and delete the files you want to delete. Link to comment Share on other sites More sharing options...
m3uz 0 Share Posted March 19, 2017 I upvoted, can I have a trial? Link to comment Share on other sites More sharing options...
Hashtag 8702 Author Share Posted March 19, 2017 I upvoted, can I have a trial? Enjoy. m3uz 1 Link to comment Share on other sites More sharing options...
NZL 13 Share Posted March 19, 2017 (edited) I tested your script/bot? I dont even know anymore.Anyway if you turn off banking and turn on power chop.The game interface freezes. Crash with the UI? nothing in debug eitherand also running with banking off powerchop off non stop get this error (even turning off the script this kept spamming) [ERROR]03:07:00: Exception has occurred while running! Please report error to developer if problem persists: java.lang.NullPointerException at org.dreambot.api.methods.ViewportTools.getScreenCoordinates(ViewportTools.java:283) at org.dreambot.api.methods.ViewportTools.getModelArea(ViewportTools.java:697) at org.dreambot.api.wrappers.interactive.Entity.getModelArea(Entity.java:219) at org.dreambot.api.wrappers.interactive.Entity.isOnScreen(Entity.java:49) at main.Main.onLoop(Unknown Source) at org.dreambot.api.script.AbstractScript.run(AbstractScript.java:238) at java.lang.Thread.run(Unknown Source)Also some more feedback if you could get the "presets" to automatically populate when you go to the tab rather than having to click again Edited March 19, 2017 by NZL Link to comment Share on other sites More sharing options...
Hashtag 8702 Author Share Posted March 19, 2017 I tested your script/bot? I dont even know anymore. Anyway if you turn off banking and turn on power chop. The game interface freezes. Crash with the UI? nothing in debug either and also running with banking off powerchop off non stop get this error (even turning off the script this kept spamming) [ERROR]03:07:00: Exception has occurred while running! Please report error to developer if problem persists: java.lang.NullPointerException at org.dreambot.api.methods.ViewportTools.getScreenCoordinates(ViewportTools.java:283) at org.dreambot.api.methods.ViewportTools.getModelArea(ViewportTools.java:697) at org.dreambot.api.wrappers.interactive.Entity.getModelArea(Entity.java:219) at org.dreambot.api.wrappers.interactive.Entity.isOnScreen(Entity.java:49) at main.Main.onLoop(Unknown Source) at org.dreambot.api.script.AbstractScript.run(AbstractScript.java:238) at java.lang.Thread.run(Unknown Source)Also some more feedback if you could get the "presets" to automatically populate when you go to the tab rather than having to click again Thanks for the feedback. Hmm.. make sure your zoom is set to default. Link to comment Share on other sites More sharing options...
NZL 13 Share Posted March 19, 2017 Thanks for the feedback. Hmm.. make sure your zoom is set to default. Is on default. not sure what happened lol. Also will you be adding in the shift click drop method? really would love to powerchop at a place where a level 3 skiller doesn't get owned Link to comment Share on other sites More sharing options...
Naughty Vic 6 Share Posted March 19, 2017 Is on default. not sure what happened lol. Also will you be adding in the shift click drop method? really would love to powerchop at a place where a level 3 skiller doesn't get owned I'm sure it will be added in the future, since Hashtag seems to take care of his scripts. As for getting "owned" for not using shift click, doesn't really make sense. It would be more based on your level and axe type then it would to take an extra 20 seconds, give or take, to drop the logs. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now